	Hyundai Matrix service from 2002 to 2006 of release
		1. Operation and car maintenance
		2. Engine
		3. Transmission
			3.1. Coupling
			3.2. Mechanical transmission
			3.3. Automatic transmission
			3.4. Driving mechanism
			3.5. Tables
		4. Running gear
		5. Steering mechanism
		6. Brake system
		7. Onboard electric equipment
		8. Body
		9. Electric equipment schemes

화려한 조명 아래 춤추는 사람들로 가득한 강남 엘리트 은 밤의 열기를 제대로 느낄 수 있는 공간이다.

Почему перестал греть полотенцесушитель?

3-transmissiya.html

3. Transmission

General information

Pumping of a hydraulic actuator of coupling

Removal and installation of the main cylinder of a hydraulic actuator of coupling

Removal and installation of a pedal of coupling

Check of the switch of blocking of ignition

Removal, check and installation of a casing of coupling and conducted disk

Dismantling, check and assembly of the working cylinder of coupling

Mechanical transmission

Technical operations on the car

Removal and installation of a mechanical box предач

Removal, check and installation of the mechanism of gear shifting

Automatic transmission

The main checks and adjustments on the car (A4AF3)

Check of chains of the switch of blocking of a starter (AKPP selector switch)

Check of components of a control system by an automatic transmission

Hydrotransformer check on completely braked car (Тorque converter stall test)

The analysis of results of check on completely braked car

Pressure check in AKPP hydrocontrol system

Self-diagnostics function

Technical operations on the transmission removed from the car

Pressure check in AKPP hydrocontrol system

Hydrotransformer check on completely braked car (Stall test)

The main checks and adjustments on the car (A4A42)

Adjustment of the lowered pressure

Removal and installation of an automatic transmission (A4A42)

Removal and installation of an automatic transmission (A4AF3)

Mechanism of management of an automatic transmission

Driving mechanism

Removal, check and installation of a shaft of a drive of a forward wheel

Shaft of a drive of a forward wheel (the CV JOINT with the jack of length (DOJ) and the CV JOINT «Birfilda BJ»)

Shaft of a drive of a forward wheel (CV JOINT «Tripod TJ»)

Nave of a forward wheel and rotary fist of a detail

Nave of a back wheel

Table 3.1 Technical characteristics

Table 3.2 Data for check and adjustment

Table 3.3 Moments of an inhaling of carving connections

Table 3.4 Possible malfunctions, their reasons and ways of elimination

Table 3.5 Technical characteristics of a mechanical transmission

Table 3.6 Possible malfunctions, their reasons and ways of elimination

Table 3.7 Technical characteristics of automatic transmissions

Table 3.8 Nominal rate

Table 3.9 Nominal rate

Table 3.10 Check of pressure in AKPP hydrocontrol system

Table 3.11 Search of malfunctions in sizes of pressure in AKPP hydrocontrol system

Table 3.12 Road tests (Road test)

Table 3.13 Codes malfunctions (description)

Table 3.14 Search of malfunctions in diagnostic codes

Table 3.15 the check points Components functioning at inclusion of each transfer

Table 3.16 For identification of persistent bearings, holders of persistent bearings and persistent washers

The table 3.17 Nominal rates of pressure in AKPP hydrocontrol system

Table 3.18 Preliminary search of malfunctions in case of existence of inappropriate pressure

Table 3.19 Technical characteristics of the driving mechanism

Table 3.20 Moments of an inhaling of carving connections

Table 3.21 Search of malfunctions

«previous page
2.8.25. The table 2.25 Check by means of a tester

following page»
3.1. Coupling