Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.2.1. Technical operations on the car
3.2.2. Removal and installation of a mechanical box предач
3.2.3. Removal, check and installation of the mechanism of gear shifting
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 







3-2-2-snyatie-i-ustanovka-mekhanicheskojj-korobki-predach.html

3.2.2. Removal and installation of a mechanical box предач

Removal
Remove a drain stopper and merge oil from a transmission.
Remove the working cylinder of a hydraulic actuator of coupling.
Remove the case of the air filter assembled.
Remove the storage battery and its pallet.

Cable of a drive of a speedometer
Fig. 3.37. Cable of a drive of a speedometer


Disconnect a cable of a choice of transfers and a gear shifting cable (fig. 3.37).

Socket of the switch of lamps of a backing
Fig. 3.38. Socket of the switch of lamps of a backing


Disconnect the socket of the switch of lamps of a backing (fig. 3.38).
Disconnect a cable of a drive of a speedometer.
Disconnect a cable of a drive of coupling or a tube of a hydraulic actuator of coupling.
Remove the bottom protective casing of the engine and a lateral cover of a check point.
Remove forward and back support of the engine assembled.
Remove the left and right forward wheels assembled.
Unscrew a bolt of fastening of a forward rack of a suspension bracket to a rotary fist.
Remove shaft of a drive of wheels.

Starter removal
Fig. 3.39. Starter removal


Remove a starter (fig. 3.39).

Engine fixing on the special adaptation
Fig. 3.40. Engine fixing on the special adaptation


Fix the engine on the special adaptation (a traverse 09200-38001) for fastening arms (fig. 3.40).
Remove a transmission support (at the left).
Unscrew the top bolt of fastening of a transmission.

Fastening of a protective cover of a case
Fig. 3.41. Fastening of a protective cover of a case


Remove a protective cover of a case of a check point (fig. 3.41).
Establish under a transmission a transmission telescopic rack (Jack T/m).
Unscrew the bottom bolt of fastening of a transmission.
Remove a casing of coupling and a conducted disk of coupling.
Remove a flywheel.
Remove a transmission.

Installation
Installation of details is made as it should be, the return to removal.

«previous page
3.2.1. Technical operations on the car
following page»
3.2.3. Removal, check and installation of the mechanism of gear shifting