Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. The main checks and adjustments on the car (A4AF3)
3.3.2. Check of chains of the switch of blocking of a starter (AKPP selector switch)
3.3.3. Check of components of a control system by an automatic transmission
3.3.4. Hydrotransformer check on completely braked car (Тorque converter stall test)
3.3.5. The analysis of results of check on completely braked car
3.3.6. Pressure check in AKPP hydrocontrol system
3.3.7. Self-diagnostics function
3.3.8. Technical operations on the transmission removed from the car
3.3.9. Pressure check in AKPP hydrocontrol system
3.3.10. Hydrotransformer check on completely braked car (Stall test)
3.3.11. The main checks and adjustments on the car (A4A42)
3.3.12. Adjustment of the lowered pressure
3.3.13. Removal and installation of an automatic transmission (A4A42)
3.3.14. Removal and installation of an automatic transmission (A4AF3)
3.3.15. Mechanism of management of an automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 







3-3-2-proverka-cepejj-vyklyuchatelya-blokirovki-startera-pereklyuchatel-selektora-akpp.html

3.3.2. Check of chains of the switch of blocking of a starter (AKPP selector switch)

Check of chains of the switch of blocking of a starter
Fig. 3.48. Check of chains of the switch of blocking of a starter



Adjustment of the switch of blocking of a starter (AKPP selector switch) and cable of management of AKPP

Adjustment of the switch of blocking of a starter
Fig. 3.49. Adjustment of the switch of blocking of a starter



Establish the AKPP selector lever in the situation "N".
Weaken an adjusting nut of fastening of a cable of management of AKPP to the lever of manual control.
Establish the lever of manual control (manual control lever) in neutral situation («N»).

Bolts of fastening of the switch of blocking of a starter
Fig. 3.50. Bolts of fastening of the switch of blocking of a starter


Weaken bolts of fastening of the switch of blocking of a starter (the AKPP selector switch) and turn its case so that the opening in a flange of the case of the switch was combined with an opening on the end of the lever of manual control (manual control lever, section A-and in drawing 3.50
Without allowing change of position of the switch of blocking of a starter (the AKPP selector switch), tighten bolts of its fastening the nominal moment.

Adjusting nut
Fig. 3.51. Adjusting nut


Slightly pull a cable connecting the lever of the AKPP selector to the block of operating valves in the direction, specified by an arrow in drawing 3.51, and then tighten an adjusting nut.
Be convinced of that the lever of the AKPP selector is in the situation "N".
Check compliance of included transfers to each position of the lever of the AKPP selector and be convinced that the transmission works normally at each of ranges.

«previous page
3.3.1. The main checks and adjustments on the car (A4AF3)
following page»
3.3.3. Check of components of a control system by an automatic transmission