Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. The main checks and adjustments on the car (A4AF3)
3.3.2. Check of chains of the switch of blocking of a starter (AKPP selector switch)
3.3.3. Check of components of a control system by an automatic transmission
3.3.4. Hydrotransformer check on completely braked car (Тorque converter stall test)
3.3.5. The analysis of results of check on completely braked car
3.3.6. Pressure check in AKPP hydrocontrol system
3.3.7. Self-diagnostics function
3.3.8. Technical operations on the transmission removed from the car
3.3.9. Pressure check in AKPP hydrocontrol system
3.3.10. Hydrotransformer check on completely braked car (Stall test)
3.3.11. The main checks and adjustments on the car (A4A42)
3.3.12. Adjustment of the lowered pressure
3.3.13. Removal and installation of an automatic transmission (A4A42)
3.3.14. Removal and installation of an automatic transmission (A4AF3)
3.3.15. Mechanism of management of an automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 







3-3-14-snyatie-i-ustanovka-avtomaticheskojj-korobki-peredach-a4af3.html

3.3.14. Removal and installation of an automatic transmission (A4AF3)

Removal

Oil pallet of a transmission
Fig. 3.98. Oil pallet of a transmission


Unscrew a nice stopper and merge oil for (ATF) AKPP from a transmission (fig. 3.98).
Remove the case of the air filter assembled.

Collars of taking-away and bringing hoses of a maslookhladitel
Fig. 3.99. Collars of taking-away and bringing hoses of a maslookhladitel


Remove collars and disconnect taking-away and bringing hoses of a maslookhladitel of AKPP (fig. 3.99).

NOTE
After a detachment of hoses it is necessary to close opening jams in hoses and transmission unions not to allow hit in them of a dust or extraneous particles.

Remove a cable of management of AKPP.

Cable of a drive of a speedometer
Fig. 3.100. Cable of a drive of a speedometer


Remove a cable of a drive of a speedometer (fig. 3.100).

Sockets of the switch of blocking of a starter, electromagnetic valves and sensor of temperature of AKPP oil
Fig. 3.101. Sockets of the switch of blocking of a starter, electromagnetic valves and sensor of temperature of AKPP oil


Disconnect sockets of the switch of blocking of a starter (the AKPP selector switch), electromagnetic valves, the sensor of temperature of AKPP oil, the switch of the servo-driver of a brake of compulsory fall of transfer (Kickdown servo switch) (fig. 3.101).

Bolt of fastening of a transmission to the engine
Fig. 3.102. A bolt of fastening of a transmission to the engine


Unscrew a bolt of fastening of a transmission to the engine, the check point located on the top part (fig. 3.102).

Engine fixing on a traverse
Fig. 3.103. Engine fixing on a traverse


Fix the engine on the special adaptation (a traverse 09200-38001) for fastening arms (fig. 3.103).
Lift the car on the lift.
Disconnect tips of steering drafts, spherical hinges of the bottom levers of a suspension bracket and remove shaft of a drive of wheels. Remove the steering mechanism and the stabilizer of cross-section stability.
Disconnect the kardanny hinge of a shaft of a steering.

NOTE
Put labels of relative position of the kardanny hinge of a shaft of a steering and a shaft of the steering mechanism before their detachment for simplification of the subsequent assembly.


Bolts of fastening of a stretcher
Fig. 3.104. Bolts of fastening of a stretcher


Unscrew bolts of fastening and remove a stretcher (fig. 3.104).
Remove a starter.
Unscrew bolts of fastening of a transmission.
Unscrew bolts of fastening of a transmission to the engine.
Remove a transmission assembled by means of a transmission telescopic rack (jack T/m).

ATTENTION
Support of the engine and transmission should be established in a certain order.

Order of installation of arms of support
Arm of a lateral support of the engine.
Arm of a support of a transmission.
Arm of a back support of the engine.
Arm of a forward support of the engine.

ATTENTION
Be careful at installation of an arm of a forward support of the engine, do not damage and do not deform a support. If the support is destroyed, there can be a strong vibration of the power unit at operation of the engine idling.

Installation

Transmission assembled
Fig. 3.105. Transmission assembled


Connect the hydrotransformer from a transmission and establish a transmission assembled on the engine (fig. 3.105).

Hydrotransformer
Fig. 3.106. Hydrotransformer



ATTENTION
If the hydrotransformer at first to establish on the engine, at installation of a transmission the check point epiploon will be damaged. Therefore before assembly of the power unit always establish the hydrotransformer from a transmission (fig. 3.106).

«previous page
3.3.13. Removal and installation of an automatic transmission (A4A42)
following page»
3.3.15. Mechanism of management of an automatic transmission