Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. The main checks and adjustments on the car (A4AF3)
3.3.2. Check of chains of the switch of blocking of a starter (AKPP selector switch)
3.3.3. Check of components of a control system by an automatic transmission
3.3.4. Hydrotransformer check on completely braked car (Тorque converter stall test)
3.3.5. The analysis of results of check on completely braked car
3.3.6. Pressure check in AKPP hydrocontrol system
3.3.7. Self-diagnostics function
3.3.8. Technical operations on the transmission removed from the car
3.3.9. Pressure check in AKPP hydrocontrol system
3.3.10. Hydrotransformer check on completely braked car (Stall test)
3.3.11. The main checks and adjustments on the car (A4A42)
3.3.12. Adjustment of the lowered pressure
3.3.13. Removal and installation of an automatic transmission (A4A42)
3.3.14. Removal and installation of an automatic transmission (A4AF3)
3.3.15. Mechanism of management of an automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 







3-3-6-proverka-davleniya-v-gidrosisteme-upravleniya-akpp.html

3.3.6. Pressure check in AKPP hydrocontrol system

Warm up the engine and AKPP so that the oil temperature in AKPP (ATF) reached normal working value (80-100°C).
Lift the car on the lift so that to hang out driving wheels.

Openings for manometer connection
Fig. 3.59. Openings for manometer connection


Connect special adaptations (an adapter and a manometer) to the corresponding openings for pressure check (fig. 3.59).
Measure pressure of oil in (ATF) AKPP in each highway under the conditions given in table 3.10, and check compliance of the measured sizes to nominal rates.
If the measured pressure falls outside the limits nominal rates, eliminate malfunction according to table 3.11.

«previous page
3.3.5. The analysis of results of check on completely braked car
following page»
3.3.7. Self-diagnostics function