Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. External elements of a body
8.3. System of passive safety
8.3.1. General information
8.3.2. Precautionary measures
8.3.3. Electric system
8.3.4. The module of a safety cushion and the device for a naduvaniye of an airbag (gas generator)
8.3.5. Plait of wires of SRS
8.3.6. Activation of a control lamp of SRS
8.3.7. Hour spring
8.3.8. System of definition of presence of the passenger on a forward seat (PPD)
8.3.9. Sensor of lateral blow
8.3.10. Removal and check of the module of a face-to-face safety cushion of the driver (DAB)
8.3.11. Removal of the module of a safety cushion of the passenger (PAB)
8.3.12. Prednatyazhitel of seat belts (gas generator)
8.3.13. Removal of a prednatyazhitel
8.4. Heater and conditioner
8.5. Tables
9. Electric equipment schemes
 







8-3-6-aktivaciya-kontrolnojj-lampy-srs.html

8.3.6. Activation of a control lamp of SRS

The control lamp is established in a combination of devices and gives information on a condition of system of passive safety.
In certain cases the electronic SRS block of management cannot normally function and, respectively, operate a control lamp. However, the control lamp can be activated directly and irrespective of a control unit condition. Such activation is carried out in cases listed below.
1. There is no food on the electronic SRS control unit from the ignition lock: the control lamp burns constantly.
2. There is no internal working tension: the control lamp burns constantly.
3. The socket of the electronic SRS control unit is not connected: the chain of a control lama becomes isolated a crossing point in the socket, and the lamp burns constantly.


Scheme of work of a control lamp
Fig. 8.42. Scheme of work of a control lamp




«previous page
8.3.5. Plait of wires of SRS
following page»
8.3.7. Hour spring