Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.1.1. Check and adjustment of a pedal of a brake
6.1.2. Check of operation of the vacuum amplifier of brakes without a tester
6.1.3. Air removal from a hydraulic actuator of brakes
6.1.4. Check and adjustment of a course of the lever of the parking brake
6.1.5. Removal and installation of the vacuum amplifier of brakes
6.1.6. Check of highways of brake system
6.1.7. Removal and installation of a pedal of a brake
6.1.8. Removal, check and installation of forward brake shoes
6.1.9. Dismantling, check and assembly of a brake support
6.1.10. Dismantling, check, assembly and installation of the main brake cylinder
6.1.11. Regulator of pressure of back brakes
6.1.12. Removal, check and installation of back drum-type brakes
6.1.13. Replacement of the working brake cylinder
6.1.14. Removal, check and installation of the parking brake
6.1.15. Anti-blocking system of brakes (ABS)
6.1.16. Removal and installation of the electronic ABS control unit
6.1.17. Removal and check of sensors of frequency of rotation of a wheel (ABS)
6.2. Tables
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 







6-1-6-proverka-magistralejj-tormoznojj-sistemy.html

6.1.6. Check of highways of brake system

Check
Check brake tubes on lack of cracks, deformations and corrosion.
Check brake hoses on lack of cracks, deformations and on tightness.
Estimate a condition of nuts of fastening of brake tubes.

Highways of brake system
Fig. 6.14. Highways of brake system



Installation
Establish brake hoses without twisting.
Do not allow contact of tubes and hoses to a body and mobile details of the car.
Tighten nuts and bolts of fastening the regulated moment.
Moment of an inhaling of nuts of brake tubes: 13–17 N · m, bolts of brake hoses: 25–30 N · m.

«previous page
6.1.5. Removal and installation of the vacuum amplifier of brakes
following page»
6.1.7. Removal and installation of a pedal of a brake