Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.1.1. Check and adjustment of a pedal of a brake
6.1.2. Check of operation of the vacuum amplifier of brakes without a tester
6.1.3. Air removal from a hydraulic actuator of brakes
6.1.4. Check and adjustment of a course of the lever of the parking brake
6.1.5. Removal and installation of the vacuum amplifier of brakes
6.1.6. Check of highways of brake system
6.1.7. Removal and installation of a pedal of a brake
6.1.8. Removal, check and installation of forward brake shoes
6.1.9. Dismantling, check and assembly of a brake support
6.1.10. Dismantling, check, assembly and installation of the main brake cylinder
6.1.11. Regulator of pressure of back brakes
6.1.12. Removal, check and installation of back drum-type brakes
6.1.13. Replacement of the working brake cylinder
6.1.14. Removal, check and installation of the parking brake
6.1.15. Anti-blocking system of brakes (ABS)
6.1.16. Removal and installation of the electronic ABS control unit
6.1.17. Removal and check of sensors of frequency of rotation of a wheel (ABS)
6.2. Tables
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 





Смотри здесь sla что такое.
Как резать керамическую плитку болгаркой




6-1-1-proverka-i-regulirovka-pedali-tormoza.html

6.1.1. Check and adjustment of a pedal of a brake

Fig. 6.1. Adjustment of the switch of stoplights


Rotate the switch of stoplights until the gap between the case of the switch and the lever of a pedal of a brake will not reach nominal rate. Then fix the switch a lock-nut (fig. 6.1).
Gap "And" between a pedal of a brake and the case of the switch of stoplights: 0,5–1,0 mm.

Fig. 6.2. Free wheeling of a pedal of a brake


Check a free wheeling of a pedal of a brake (fig. 6.2).
Free wheeling "In" a brake pedal: 3–8 mm.

«previous page
6.1. General information
following page»
6.1.2. Check of operation of the vacuum amplifier of brakes without a tester