Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. Power supply system
7.2. Charging system
7.3. Sitema of start
7.3.1. General information
7.3.2. Removal and starter installation
7.3.3. Adjustment of an axial gap of a leading gear wheel
7.3.4. Check of an involving winding of the traction relay
7.3.5. Check of a holding winding of the traction relay
7.3.6. Check of return of an anchor of the traction relay
7.3.7. Test in an idling mode
7.3.8. Dismantling, check of components and starter assembly
7.4. Anticreeping system
7.5. Tables
8. Body
9. Electric equipment schemes
 







7-3-7-ispytanie-v-rezhime-kholostogo-khoda.html

7.3.7. Test in an idling mode

The scheme of assembly of not loaded chain for starter test in an idling mode
Fig. 7.61. The scheme of assembly of not loaded chain for starter test in an idling mode


Collect not loaded chain for tests, as is shown in drawing 7.61.
Rheostat adjust tension of the storage battery so that the voltmeter showed 11,5 V.Ubedites's value that the maximum consumed current corresponds to nominal rate, and also that the anchor of a starter rotates freely, without breakthroughs and jammings.
Nominal current: 60 And or it is less.

«previous page
7.3.6. Check of return of an anchor of the traction relay
following page»
7.3.8. Dismantling, check of components and starter assembly