Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. Power supply system
7.2. Charging system
7.3. Sitema of start
7.3.1. General information
7.3.2. Removal and starter installation
7.3.3. Adjustment of an axial gap of a leading gear wheel
7.3.4. Check of an involving winding of the traction relay
7.3.5. Check of a holding winding of the traction relay
7.3.6. Check of return of an anchor of the traction relay
7.3.7. Test in an idling mode
7.3.8. Dismantling, check of components and starter assembly
7.4. Anticreeping system
7.5. Tables
8. Body
9. Electric equipment schemes
 







7-3-2-snyatie-i-ustanovka-startera.html

7.3.2. Removal and starter installation

Disconnect a wire from the negative (–) plugs of the storage battery.
Remove a cable of a drive of a speedometer and a gear shifting cable.
Disconnect the socket of a plait of wires of a starter and a wire of a conclusion of a starter.
Remove a starter assembled.
Installation is made as it should be, the return to removal.


Starter fastening
Fig. 7.54. Starter fastening




Starter components
Fig. 7.55. Starter components: 1–forward arm; 2–forward plug; 3–cover; 4–screw; 5–traction relay; 6–anchor of the traction relay; 7–spring; 8–adjusting laying; 9–lever; 10-holder; 11-spring; 12-laying; 13-washer; 14-lock ring; 15-restrictive ring; 16-obgonny coupling; 17-starter anchor; 18-washer; 19-a pole with a stator winding assembled; 20-shchetkoderzhatel assembled; 21-back cover; 22-back plug; 23-screw; 24-bolt




«previous page
7.3.1. General information
following page»
7.3.3. Adjustment of an axial gap of a leading gear wheel