Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
2.1. Maintenance
2.1.1. Check of level of engine oil
2.1.2. Replacement of engine oil
2.1.3. Choice of the oil filter
2.1.4. Replacement of the oil filter
2.1.5. Check of tightness of system of cooling
2.1.6. Check of valves of a cover of a radiator
2.1.7. Check of concentration of antifreeze
2.1.8. Compression check
2.1.9. Adjustment of a tension of a belt of a drive of GRM
2.1.10. Drive of hinged units
2.1.11. Natyazhitel of a belt of a drive of hinged units
2.1.12. Adjustment of a belt of a drive of hinged units
2.1.13. Adjustment of a belt of a drive of the generator
2.2. Mechanical part (engine of 1,6 l)
2.3. Mechanical part (engine of 1.8 l)
2.4. Cooling system
2.5. Greasing system
2.6. Power supply system
2.7. Control system, fuel system and system of decrease in toxicity
2.8. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 









2-1-5-proverka-germetichnosti-sistemy-okhlazhdeniya.html

2.1.5. Check of tightness of system of cooling

Uncover a radiator.
Be convinced that level of cooling liquid reaches a bulk mouth of a radiator.

Fig. 2.5. Tester connection for check of the valve of a cover of a radiator


Connect a tester for check of the valve of a cover of a radiator to a bulk mouth of a radiator and create pressure of 140 kPas. Keeping the specified pressure during 2 mines, check absence of leakages of cooling liquid from a radiator, connections of hoses or hoses of system of cooling (fig. 2.5).

NOTE
Cooling liquid can be extremely hot. Do not uncover a radiator as it will lead to emission of steam and a razbryzgivaniye of hot or boiling liquid and can become the reason of a travmirovaniye of the service personnel. Start to work with cooling system only after engine cooling.

Carefully remove moisture from a surface of all details checked on absence of leaks.
At tester extraction for check of the valve of a cover of a radiator from a mouth of a radiator try not to allow razbryzgivaniye of cooling liquid.
At connection and a tester detachment, and also during carrying out check be careful not to deform a bulk mouth of a radiator.
In the presence of leaks repair or replace the corresponding detail.

«previous page
2.1.4. Replacement of the oil filter
following page»
2.1.6. Check of valves of a cover of a radiator