2.1.2. Replacement of engine oil
On the cars equipped with engines with catalytic converter, it is necessary to watch that oil level on masloizmeritelny щупу was not higher than a maximum mark. If in the car with catalytic converter too much oil was filled in, its superfluous part should be removed from a case with means plum or a suction (the special vacuum pump), otherwise not burned down oil will get into system of production of the fulfilled gases and can destroy catalytic converter.
Start the engine and warm up it to working temperature.
Muffle the engine.
|Fig. 2.2. Drain stopper of the oil pallet
Uncover a maslozalivny mouth and unscrew a drain stopper of the oil pallet. Merge engine oil (fig. 2.2)
Establish and tighten a drain stopper the nominal moment of an inhaling.
Moment of an inhaling of a drain stopper: 35–45 N · m.
Fill in in the engine fresh engine oil through a maslozalivny mouth.
Refueling capacity without replacement of the oil filter – 3 l, with replacement of the oil filter – 3,3 l.
Establish a cover of a maslozalivny mouth.
Start the engine and let's to it work.
Muffle the engine and check level of engine oil. If necessary add oil.