Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
2.1. Maintenance
2.1.1. Check of level of engine oil
2.1.2. Replacement of engine oil
2.1.3. Choice of the oil filter
2.1.4. Replacement of the oil filter
2.1.5. Check of tightness of system of cooling
2.1.6. Check of valves of a cover of a radiator
2.1.7. Check of concentration of antifreeze
2.1.8. Compression check
2.1.9. Adjustment of a tension of a belt of a drive of GRM
2.1.10. Drive of hinged units
2.1.11. Natyazhitel of a belt of a drive of hinged units
2.1.12. Adjustment of a belt of a drive of hinged units
2.1.13. Adjustment of a belt of a drive of the generator
2.2. Mechanical part (engine of 1,6 l)
2.3. Mechanical part (engine of 1.8 l)
2.4. Cooling system
2.5. Greasing system
2.6. Power supply system
2.7. Control system, fuel system and system of decrease in toxicity
2.8. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 







2-1-10-privod-navesnykh-agregatov.html

2.1.10. Drive of hinged units

Survey and drive check
Visually examine on existence of obvious signs of mechanical damages.
About 15 cracks on a belt edge at distance of 100 mm are allowed. If cracks exceed an admissible limit or lack of any fragments of a belt is found, establish a new belt of hinged units.

ATTENTION
Do not grease a belt of a drive of hinged units, its natyazhitel or an intermediate pulley (ы) since it can lead to damage of structure of a material of a belt of a drive, the mechanism of damping of a natyazhitel of a belt, the bearing of a pulley of a natyazhitel and the bearing of an intermediate pulley (ов).

Small diffused deposits of a rubber crumb do not testify to malfunction of a belt and consequently it is not necessary to establish a new belt of a drive of hinged units.
The extended deposits of a rubber crumb borrowing to 50 % of height of an edge of a belt of a drive of hinged units, too do not testify to malfunction, but it can cause the increased noise. If the increased noise is present, establish a new belt of a drive of hinged units.
Big deposits of a rubber crumb along flutes testify to malfunction, it can cause the increased noise and violation of stability of work of a belt of a drive. If big deposits or excessive noise of a belt are obvious, establish a new belt of a drive of hinged units.
Check a belt on existence of cracks. If the size of damage exceeds an admissible limit, establish a new belt of a drive of hinged units.




Types of damages of a belt of a drive of hinged units
Fig. 2.13. Types of damages of a belt of a drive of hinged units


Check a belt on existence of damages. If there are no large fragments of a belt, establish a new belt of a drive of hinged units (fig. 2.13).

Lack of large fragments of a belt of a drive of hinged units
Fig. 2.14. Lack of large fragments of a belt of a drive of hinged units




«previous page
2.1.9. Adjustment of a tension of a belt of a drive of GRM
following page»
2.1.11. Natyazhitel of a belt of a drive of hinged units