Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. General information
5.1.1. Technical operations on the car
5.1.2. A steering with the amplifier
5.1.3. Removal, check and installation of a steering column and shaft
5.1.4. Removal and installation of the lock of a steering column
5.1.5. Removal and installation of the driveshaft of a steering
5.1.6. Removal of the steering mechanism
5.1.7. Dismantling, assembly and installation of the steering mechanism
5.1.8. Removal and installation of hoses of hydrosystem of the amplifier of a steering
5.1.9. Removal and installation of a returnable tube and hose
5.1.10. Steering check with the amplifier
5.1.11. Removal, dismantling, check and assembly of the pump of the hydraulic booster of a steering
5.2. Tables
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 







5-1-6-snyatie-rulevogo-mekhanizma.html

5.1.6. Removal of the steering mechanism

Steering mechanism
Fig. 5.27. Steering mechanism



Inlet air hose of the engine
Fig. 5.28. Inlet air hose of the engine


Remove an inlet air hose of the engine assembled (fig. 5.28).
Disconnect clamps delivery and returnable шлагов hydrosystems of the amplifier.
Merge working liquid from hydrosystem of the amplifier.
Disconnect delivery and returnable tubes from unions of the steering mechanism.

Driveshaft detachment
Fig. 5.29. Driveshaft detachment


Disconnect the steering driveshaft from the steering mechanism in salon (fig. 5.29).
Remove a tape collar and вытолкните a protective cover of a shaft of a steering, then remove a basic plate of a protective cover.
Will hang out car wheels.
Remove forward wheels.

Detachment of the spherical hinge of a tip of steering draft from a rotary fist
Fig. 5.30. A detachment of the spherical hinge of a tip of steering draft from a rotary fist


Take шплинт, unscrew a nut of fastening and disconnect the spherical hinge of a tip of steering draft from a rotary fist with the help of the special tool (09568-31000) (fig. 5.30).

Right arm of fastening of the stabilizer of cross-section stability
Fig. 5.31. Right arm of fastening of the stabilizer of cross-section stability


Remove the right arm of fastening of the stabilizer of cross-section stability (fig. 5.31).

Forward exhaust silencer
Fig. 5.32. Forward exhaust silencer


Remove the forward exhaust silencer assembled (fig. 5.32).

Brackets of fastening of the steering mechanism
Fig. 5.33. Brackets of fastening of the steering mechanism


Remove brackets of fastening of the steering mechanism and clamps of delivery and returnable tubes (fig. 5.33).

Extraction of the steering mechanism assembled through an arch of the right forward wheel
Fig. 5.34. Extraction of the steering mechanism assembled through an arch of the right forward wheel


Take the steering mechanism assembled through an arch of the right forward wheel (fig. 5.34).

NOTE
Take the steering mechanism slowly and very carefully not to damage protective covers of steering drafts and spherical hinges of tips of steering drafts.

«previous page
5.1.5. Removal and installation of the driveshaft of a steering
following page»
5.1.7. Dismantling, assembly and installation of the steering mechanism