Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. General information
5.1.1. Technical operations on the car
5.1.2. A steering with the amplifier
5.1.3. Removal, check and installation of a steering column and shaft
5.1.4. Removal and installation of the lock of a steering column
5.1.5. Removal and installation of the driveshaft of a steering
5.1.6. Removal of the steering mechanism
5.1.7. Dismantling, assembly and installation of the steering mechanism
5.1.8. Removal and installation of hoses of hydrosystem of the amplifier of a steering
5.1.9. Removal and installation of a returnable tube and hose
5.1.10. Steering check with the amplifier
5.1.11. Removal, dismantling, check and assembly of the pump of the hydraulic booster of a steering
5.2. Tables
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 







5-1-4-snyatie-i-ustanovka-zamka-rulevojj-kolonki.html

5.1.4. Removal and installation of the lock of a steering column

Removal of an arm of the lock of a steering column
Fig. 5.23. Removal of an arm of the lock of a steering column


If removal of the lock of a steering column assembled is necessary, by means of a chisel make in a head of a special bolt (with a cut-off head) lock fastenings a flute, then by means of a screw-driver remove an arm of the lock of a steering column (fig. 5.23).

Removal of the lock of a steering column
Fig. 5.24. Removal of the lock of a steering column


Remove the lock of a steering column from a steering column and a steering shaft assembled (fig. 5.24).
Installation is made as it should be, the return to removal.

«previous page
5.1.3. Removal, check and installation of a steering column and shaft
following page»
5.1.5. Removal and installation of the driveshaft of a steering