5.1.10. Steering check with the amplifier

Be convinced of absence of cracking of hoses, slightly braiding them a hand.

Be convinced of lack of traces of contact of hoses with car details.

Fill a tank of hydrosystem of the amplifier of a steering with the recommended liquid to a label "MOVE" on a tank wall.

By means of a jack will hang out forward wheels of the car. Disconnect wires of a high voltage from ignition coils. Scroll a cranked shaft of the engine several short-term inclusions of a starter (about 5-6 inclusions) at continuous turns of a steering wheel to the left and to the right against the stop five or six times during 15–20 pages.

Connect wires of a high voltage to ignition coils, then start the engine and leave it to idle. Turn a steering wheel from an emphasis against the stop before disappearance of vials of air in a tank of hydrosystem of the amplifier.

Be convinced of that working liquid is transparent, without turbidity, and its level is in a tank about a mark "MOVE" on a tank wall.

ATTENTION If liquid level considerably changes at turn of a steering wheel or sharply raises after an engine stop, air from hydrosystem means is removed not completely. Incomplete removal of air from hydrosystem of the amplifier will lead to emergence of extraneous noise and reduction of service life of the pump and other elements of hydrosystem of the amplifier.