Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. Power supply system
7.2. Charging system
7.2.1. General information
7.2.2. Check of a power-supply circuit of a genrator
7.2.3. Check of falling of target tension of the generator
7.2.4. Check of a current of return of the generator
7.2.5. Check of adjustable tension (check of a regulator of tension)
7.2.6. Removal and generator installation
7.2.7. Dismantling, check and generator assembly
7.2.8. Storage battery
7.3. Sitema of start
7.4. Anticreeping system
7.5. Tables
8. Body
9. Electric equipment schemes
 







7-2-6-snyatie-i-ustanovka-generatora.html

7.2.6. Removal and generator installation

Generator fastening
Fig. 7.13. Generator fastening



Removal

Detachment of the negative plug of the accumulator
Fig. 7.14. Detachment of the negative plug of the accumulator


Disconnect a wire from the negative (–) plugs of the storage battery. Disconnect the socket of the fan of a radiator and the socket of the fan of a kondensor of the conditioner (fig. 7.14).

Bolts of fastening of support of a radiator
Fig. 7.15. Bolts of fastening of support of a radiator


Unscrew bolts of fastening of support of a radiator (fig. 7.15).

Adjusting and lock bolts
Fig. 7.16. Adjusting and lock bolts


Weaken an adjusting bolt on an adjusting level of the generator and remove a lock bolt (fig. 7.16).
Then lift the car.

Negative socket of the generator
Fig. 7.17. Negative socket of the generator


Disconnect the socket of the generator and a wire from a conclusion "In" the generator (fig. 7.17).

Nut and bolt of sharnirny fastening of the generator
Fig. 7.18. Nut and bolt of sharnirny fastening of the generator


Remove a belt of a drive of the generator. Unscrew a nut and a bolt of sharnirny fastening of the generator (fig. 7.18).
Then raise a radiator and remove the generator assembled.

«previous page
7.2.5. Check of adjustable tension (check of a regulator of tension)
following page»
7.2.7. Dismantling, check and generator assembly