Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. Power supply system
7.1.1. General information
7.1.2. Ignition system
7.1.3. Check of the lock of ignition
7.1.4. Check of coils of ignition
7.1.5. Check and cleaning of spark plugs
7.1.6. Engine diagnostics on a condition of spark plugs
7.1.7. Removal and installation of the coil of ignition
7.2. Charging system
7.3. Sitema of start
7.4. Anticreeping system
7.5. Tables
8. Body
9. Electric equipment schemes
 





Как собрать унитаз своими руками?




7-1-7-snyatie-i-ustanovka-katushki-zazhiganiya.html

7.1.7. Removal and installation of the coil of ignition

Remove a safety lock of system of ignition (a fusible insert of F face value 30 And).
Uncover heads of cylinders.
Disconnect wires of system of ignition from coils and disconnect candle wires of a high voltage.
Unscrew a bolt of fastening of the block of coils of ignition and remove coils.
Installation is carried out as it should be, the return to removal.

Laying of candle wires of a high voltage
The wrong laying of candle wires of a high voltage leads to EDS prompting in the next wires that can become the reason of admissions of ignition, to emergence of breakthroughs and car twitchings on high high-speed modes.
Be attentive, correctly lay candle wires of a high voltage.

«previous page
7.1.6. Engine diagnostics on a condition of spark plugs
following page»
7.2. Charging system