Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. Power supply system
7.1.1. General information
7.1.2. Ignition system
7.1.3. Check of the lock of ignition
7.1.4. Check of coils of ignition
7.1.5. Check and cleaning of spark plugs
7.1.6. Engine diagnostics on a condition of spark plugs
7.1.7. Removal and installation of the coil of ignition
7.2. Charging system
7.3. Sitema of start
7.4. Anticreeping system
7.5. Tables
8. Body
9. Electric equipment schemes
 







7-1-2-sistema-zazhiganiya.html

7.1.2. Ignition system

General information
The corner of an advancing of ignition is supervised by an electronic control system. Sizes of optimum angles of an advancing of ignition for all power setting are written down in memory of the electronic control unit by the engine (ECM).
Power setting (frequency of rotation of a cranked shaft, loading, a thermal condition of the engine etc.) is determined by signals of various sensors. On the basis of signals from sensors and data on optimum angles of an advancing of ignition the electronic control unit the engine (ECM) sends signals on current interruption in primary winding of the coil of ignition.
In the coil of ignition the high voltage for an iskroobrazovaniye is created, and thus there is a management of a corner of an advancing of ignition.

«previous page
7.1.1. General information
following page»
7.1.3. Check of the lock of ignition