Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. Power supply system
7.1.1. General information
7.1.2. Ignition system
7.1.3. Check of the lock of ignition
7.1.4. Check of coils of ignition
7.1.5. Check and cleaning of spark plugs
7.1.6. Engine diagnostics on a condition of spark plugs
7.1.7. Removal and installation of the coil of ignition
7.2. Charging system
7.3. Sitema of start
7.4. Anticreeping system
7.5. Tables
8. Body
9. Electric equipment schemes
 







7-1-4-proverka-katushek-zazhiganiya.html

7.1.4. Check of coils of ignition

Measurement of resistance of primary winding of the coil of ignition
Fig. 7.2. Measurement of resistance of primary winding of the coil of ignition


Measure resistance of primary winding of the coil between conclusions of 1 and 2 sockets C18-2 and C68-1 (the ignition coil for cylinders No. 1 and No. 4) coils of ignition and between conclusions of 1 and 2 sockets C18-1 and C68-2 (the ignition coil for cylinders No. 2 and No. 3) ignition coils (fig. 7.2).
Nominal rate: 0,5 ±0,05 Ohm.

Measurement of resistance of a secondary winding of the coil of ignition
Fig. 7.3. Measurement of resistance of a secondary winding of the coil of ignition


Measure resistance of a secondary winding between conclusions of a high voltage for cylinders No. 1 and No. 4, and also for cylinders No. 2 and No. 3 (fig. 7.3).
Nominal rate: 12,1 ±1,8 kiloohm.

ATTENTION
Before measurement of resistance of a secondary winding be convinced that the socket of the coil of ignition is disconnected.

«previous page
7.1.3. Check of the lock of ignition
following page»
7.1.5. Check and cleaning of spark plugs