Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
4.1. General information
4.2. Forward suspension bracket
4.2.1. Removal and installation of a forward amortizatorny rack
4.2.2. Dismantling, check and assembly of an amortizatorny rack
4.2.3. Removal, check and installation of the bottom lever of a suspension bracket
4.2.4. Removal, check and installation of the forward stabilizer of cross-section stability
4.3. Back suspension bracket
4.4. Tables
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 







4-2-1-snyatie-i-ustanovka-perednejj-amortizatornojj-stojjki.html

4.2.1. Removal and installation of a forward amortizatorny rack

The lobby is resistant assembled
Fig. 4.15. The lobby is resistant assembled



Removal
Remove a forward wheel.

Arm of a brake hose
Fig. 4.16. Arm of a brake hose


Disconnect an arm of a brake hose from a forward rack assembled on models with ABS remove the sensor of frequency of rotation of a wheel from a rotary fist and disconnect a sensor wire from a forward rack (fig. 4.16).

NOTE
Do not apply considerable efforts at a detachment of details.


Nuts of fastening of a dempfiruyushchy support of a forward rack
Fig. 4.17. Nuts of fastening of a dempfiruyushchy support of a forward rack


Unscrew three nuts of fastening of a dempfiruyushchy support of a forward rack (top) (fig. 4.17).

Bolts of fastening of a forward rack to a rotary fist
Fig. 4.18. Bolts of fastening of a forward rack to a rotary fist


Unscrew bolts of fastening of a forward rack to a rotary fist (bottom) and remove a rack assembled (fig. 4.18).

Installation
Before installation of a forward rack be assembled convinced of purity of surfaces of connection of details.
Tighten fastening specified below details the next nominal moments.


Connect an arm of a brake hose to a forward rack on models with ABS establish the sensor of frequency of rotation of a wheel on a rotary fist and connect a sensor wire to a forward rack.

«previous page
4.2. Forward suspension bracket
following page»
4.2.2. Dismantling, check and assembly of an amortizatorny rack