Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. External elements of a body
8.2.1. Removal and cowl installation
8.2.2. Adjustment of provision of a cowl and its lock
8.2.3. Removal and installation of a door of a back
8.2.4. Adjustment of a door of a back and lock bracket
8.2.5. Removal and installation of a forward door
8.2.6. Removal and windscreen installation
8.2.7. Removal and installation of glass of a door of a back
8.3. System of passive safety
8.4. Heater and conditioner
8.5. Tables
9. Electric equipment schemes
 







8-2-3-snyatie-i-ustanovka-dveri-zadka.html

8.2.3. Removal and installation of a door of a back

Removal

Socket of wires of an element of heating of back glass
Fig. 8.4. Socket of wires of an element of heating of back glass


Disconnect the socket of wires of an element of heating of back glass (fig. 8.4).
Remove facing of a door of a back.

Removal of an additional stoplight
Fig. 8.5. Removal of an additional stoplight


Remove an additional stoplight (fig. 8.5).

Removal of the top decorative slip
Fig. 8.6. Removal of the top decorative slip


Remove the top slip from a frame of a back door (fig. 8.6).

Removal of the panel of furnish of a door of a back
Fig. 8.7. Removal of the panel of furnish of a door of a back


Turn off four being self-cut screws and remove the panel of furnish of a door of a back (fig. 8.7).

Removal of the lateral panel of furnish of a door of a back
Fig. 8.8. Removal of the lateral panel of furnish of a door of a back


Remove the lateral decorative panel of furnish of a door of a back (fig. 8.8).
Turn off four nuts and remove a decorative overlay of a door of a back.

Removal of lamps of illumination of registration plate
Fig. 8.9. Removal of lamps of illumination of registration plate


Unscrew four screws and remove lamps of illumination of registration plate (fig. 8.9).

Removal of the central console of a door of a back
Fig. 8.10. Removal of the central console of a door of a back


After removal of assembly nuts (2EA) disconnect a core and remove the central console of a door of a back (fig. 8.10).

Removal of a cleaner of back glass
Fig. 8.11. Removal of a cleaner of back glass


Remove the lock cylinder, having turned out an assembly bolt, and remove a cleaner of back glass (fig. 8.11).
Disconnect the socket of power supply of the electric motor of an ochitstitel of back glass.

Removal of the electric motor of a cleaner of back glass
Fig. 8.12. Removal of the electric motor of a cleaner of back glass


Remove the electric motor of a cleaner of back glass after removal of an assembly nut (fig. 8.12).
Remove executive mechanisms of levers of a back door, disconnect sockets and remove levers.

Lever of a door of a back
Fig. 8.13. Lever of a door of a back



Remove a clamp of a door of a back.
Take out the elevating adaptation of a back door from the spherical hinge.
Remove a back door after removal of assembly bolts of the hinge of a back door.

Installation
Installation is made as it should be, the return to removal.

«previous page
8.2.2. Adjustment of provision of a cowl and its lock
following page»
8.2.4. Adjustment of a door of a back and lock bracket