Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
2.1. Maintenance
2.2. Mechanical part (engine of 1,6 l)
2.3. Mechanical part (engine of 1.8 l)
2.4. Cooling system
2.5. Greasing system
2.6. Power supply system
2.6.1. Removal, check and installation of a final collector
2.6.2. Removal, check and installation of an inlet collector
2.6.3. Removal, check and installation of the air filter
2.7. Control system, fuel system and system of decrease in toxicity
2.8. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 







2-6-1-snyatie-proverka-i-ustanovka-vypusknogo-kollektora.html

2.6.1. Removal, check and installation of a final collector

Components of a final collector
Fig. 2.198. Components of a final collector



Removal
Remove a heat-shielding casing of a final collector.
Remove a final collector assembled from a head of cylinders.
Remove laying of a final collector.

Check
Check a final collector on lack of cracks and damages.
On models with catalytic converter check a welded seam between a final collector and catalytic converter on lack of cracks and damages.

Installation
Installation of a final collector is made as it should be, the return to removal.

ATTENTION
Replace laying of a final collector and самоконтрящиеся nuts new before installation into place.

«previous page
2.6. Power supply system
following page»
2.6.2. Removal, check and installation of an inlet collector