Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
2.1. Maintenance
2.2. Mechanical part (engine of 1,6 l)
2.3. Mechanical part (engine of 1.8 l)
2.4. Cooling system
2.4.1. Device
2.4.2. Centrifugal pump of system of cooling
2.4.3. Removal, check and installation of a radiator of system of cooling
2.4.4. Check of a cover of a radiator
2.4.5. Removal, check and thermostat installation
2.4.6. The sensor of temperature of cooling liquid
2.5. Greasing system
2.6. Power supply system
2.7. Control system, fuel system and system of decrease in toxicity
2.8. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 







2-4-4-proverka-kryshki-radiatora.html

2.4.4. Check of a cover of a radiator

Check

Cover of a radiator of system of cooling
Fig. 2.180. Cover of a radiator of system of cooling



Checked details of a cover of a radiator
Fig. 2.181. Checked details of a cover of a radiator


Check a radiator cover on absence of damages, cracks and condition deterioration (wear, etc.) (fig. 2.181).
Check a radiator stopper on existence of damages, cracks and deterioration of properties of a material of laying (elasticity loss).
Attach a stopper to the adaptation for check of a stopper of a radiator.
By means of the pump of the adaptation create pressure before the termination of a deviation of an arrow of a manometer.
The stopper of a radiator is serviceable, if the arrow of a manometer during 10 with shows pressure above the worker.

«previous page
2.4.3. Removal, check and installation of a radiator of system of cooling
following page»
2.4.5. Removal, check and thermostat installation