Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
2.1. Maintenance
2.2. Mechanical part (engine of 1,6 l)
2.3. Mechanical part (engine of 1.8 l)
2.4. Cooling system
2.4.1. Device
2.4.2. Centrifugal pump of system of cooling
2.4.3. Removal, check and installation of a radiator of system of cooling
2.4.4. Check of a cover of a radiator
2.4.5. Removal, check and thermostat installation
2.4.6. The sensor of temperature of cooling liquid
2.5. Greasing system
2.6. Power supply system
2.7. Control system, fuel system and system of decrease in toxicity
2.8. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 







2-4-3-snyatie-proverka-i-ustanovka-radiatora-sistemy-okhlazhdeniya.html

2.4.3. Removal, check and installation of a radiator of system of cooling

Fig. 2.177. Components of a radiator of system of cooling



Removal
Disconnect the socket of the electric motor of the fan of a radiator.

Fig. 2.178. Switch of a regulator of temperature


Establish the switch of a regulator of temperature in the provision of the maximum heating (fig. 2.178).
Unscrew a drain stopper of a radiator and merge cooling liquid.
Disconnect the top and bottom hoses of a radiator and a tube of a broad tank.
On models from an automatic transmission disconnect hoses of a maslookhladitel of AKPP.

ATTENTION
After a detachment of hoses of a maslookhladitel of AKPP it is necessary to close opening jams in hoses, unions of a radiator and AKPP branch pipes not to allow an AKPP oil and hit effluence in extraneous particles.

Unscrew bolts of fastening of support of a radiator.
Remove a radiator together with the radiator electrofan.
Remove the electrofan from a radiator.

Check
Check a radiator on lack of a bend or damage of plates, and on lack of extraneous subjects between plates.
Check a radiator on absence of damages and deposits of a scum, a rust or corrosion traces.
Check radiator hoses on lack of cracks, damages or deterioration conditions (wear).
Check a broad tank on absence of damages.
Check a spring of a cover of a radiator on absence of damages.
Check pressure of opening of valves of a cover of a radiator by means of a special tester for check of system of cooling.

Electric motor of the fan of a radiator

Fig. 2.179. Check of the electrofan of a radiator


Check that the electrofan of a radiator rotates, when on conclusions of the electric motor tension of the storage battery (fig. 2.179) moves.
Check absence of extraneous noise at rotation of the electrofan of a radiator.

Installation
Fill a radiator and a broad tank with pure cooling liquid.
Start the engine and warm up it till opening of the valve of the thermostat. Then muffle the engine.
Uncover a radiator and add liquid to the basis of a bulk mouth of a radiator, then add liquid in a broad tank to the top label.
Be convinced of absence of leakages of liquid from a radiator, hoses or connections.

«previous page
2.4.2. Centrifugal pump of system of cooling
following page»
2.4.4. Check of a cover of a radiator