Hyundai Matrix service from 2002 to 2006 of release
1. Operation and car maintenance
2. Engine
2.1. Maintenance
2.2. Mechanical part (engine of 1,6 l)
2.3. Mechanical part (engine of 1.8 l)
2.4. Cooling system
2.5. Greasing system
2.6. Power supply system
2.7. Control system, fuel system and system of decrease in toxicity
2.7.1. Main malfunctions and their reasons
2.7.2. Check of a technical condition (Check of frequency of rotation of the crankshaft of the engine idling)
2.7.3. Check of operability of the fuel pump
2.7.4. System of compulsory ventilation of a case
2.7.5. Catching system паров fuels
2.7.6. System of supply of fuel
2.7.7. Check of a control system by the engine with the distributed injection
2.7.8. Removal, check and installation of fuel nozzles
2.7.9. System of decrease in toxicity of the fulfilled gases
2.7.10. Removal and installation of the main exhaust silencer
2.7.11. Check of tightness of system of production of the fulfilled gases
2.7.12. Cars with catalytic converter in system of production of the fulfilled gases
2.7.13. Service regulations of cars with catalytic converter in system of production of the fulfilled gases
2.8. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Electric equipment schemes
 





Как сделать душевую кабину самостоятельно?




2-7-2-proverka-tekhnicheskogo-sostoyaniya-proverka-chastoty-vrashheniya-kolenvala-dvigatelya.html

2.7.2. Check of a technical condition (Check of frequency of rotation of the crankshaft of the engine idling)

NOTE
Before check of idling check serviceability of spark plugs, nozzles, an idling regulator, a compression in engine cylinders.

Check conditions:
– The temperature of cooling liquid should be within 80–85 °C;
– Lighting, the electrofan of system of cooling of the engine and all auxiliaries should be switched off;
– establish the gear shifting lever in neutral situation (on cars with an automatic transmission establish the selector lever in the situation "R" or "N");
– establish a steering wheel in the situation corresponding to rectilinear movement (only for cars with the amplifier of a steering).
Attach a control tachometer to primary winding of the coil of ignition (follow indications of the maintenance instruction of a tachometer) or attach the HI-SCAN device to electric to the data line socket.
Start the engine and let's to it work idling.
Increase frequency of rotation of a cranked shaft to 2000–3000 mines-1 for the period of more than 5 with, then let's work to the engine idling within 2 minutes.
Check on a tachometer frequency of rotation of a cranked shaft idling
Frequency of rotation of a cranked shaft idling should correspond to the values given in table 2.16 «Data for check».

«previous page
2.7.1. Main malfunctions and their reasons
following page»
2.7.3. Check of operability of the fuel pump