1.3.3. Switch of a screen wiper and windscreen washer

Fig. 1.38. Three-position switch of work of a screen wiper and windscreen washer

The switch has three positions:

– faltering mode;

– slow movement;

– fast movement.

NOTE For prevention of damage of screen wipers do not try to clear them a heavy precipitation in the form of snow or ice. The collected snow or ice is necessary for clearing manually. If there is only an insignificant snow layer or ice, include a heater in a mode of heating of a windscreen and kindle snow or ice before use of screen wipers.

Fig. 1.39. Mode of inclusion of a washer of a windscreen

Washing liquid will move on a windscreen when moving the lever of the switch of a screen wiper / washer towards a steering wheel. At inclusion of a washer of a windscreen at the same time with supply of washing liquid screen wipers automatically will make two courses. The washer will cease to work, when the switch of a screen wiper / washer of a windscreen will be released.

NOTE Do not include a washer more than on 15 with or when the tank of a washer is empty. In cold weather before using a screen wiper, be convinced that brushes of a screen wiper did not freeze to glass. In areas where water freezes in the winter, use nonfreezing washing liquid for a windscreen.

Fig. 1.40. Mode of inclusion of removal of a zapotevaniye of a windscreen

For removal of a zapotevaniye of a windscreen (a single course of a screen wiper) press the switch of a screen wiper / washer of a windscreen up.

Fig. 1.41. An operating mode with a changeable interval

To use an operating mode of brushes of a screen wiper with a changeable interval, move the screen wiper switch to the situation "INT" («A faltering mode»). In this position of the switch the interval of a faltering operating mode of brushes of a screen wiper can be changed approximately from 1 to 18 with a way of turn of an adjusting castor of an interval of a faltering mode on the switch lever.